Xerox WorkCentre 3615 Service Manual

Overview
Phaser 3610, WorkCentre 3615 Service Manual1-14
Printer Options
The Phaser 3610, WorkCentre 3615 printer options include:
• Additional RAM (512 MB - 3610 only)
• Productivity Kit (Device Memory 4G)
•Duplex Unit
• Optional 550-Sheet Feeder (Trays 2, 3, and 4)
•Printer Stand
• External Wireless Network Adaptor
Additional Memory
The Phaser 3610, WorkCentre 3615 features 1 slot that accepts a 512 MB of DDR2 DIMM. Memory
module must meet the following characteristics:
• PC2-5300 (667MHz memory bus speed)
• 200 Pin DDR2 DIMM (8 chip type)
• Unbuffered, Non-parity
The printer’s configuration page lists the amount of RAM installed in the printer.
Optional 550-Sheet Feeder (Trays 2, 3, and 4)
The Optional 550-Sheet Feeder increases the input capacity of the printer and can be attached to the
printer underneath Tray 1. Up to three Optional 550-Sheet Feeders can be installed on the printer.The
Optional 550-Sheet Feeder is customer installable.
External Wireless Network Adapter
The External Wireless Network Adapter enables the printer to connect to a wireless network.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux