Xerox WorkCentre 3615 Service Manual

Maintenance
Phaser 3610, WorkCentre 3615 Service Manual6-10
ADJ 4 Adjusting the Density
The Density Adjustment feature controls how much toner is used to print. Adjust the density for lighter
toner use for saving toner or heavier for making prints bolder. A positive adjustment makes the prints
darker, while a negative adjustment makes the prints lighter.You can also adjust it to compensate for
different paper types and thicknesses.
(3610) Procedure
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Select Adjust Density, then press OK.
5. To increase or decrease the amount of offset, use the arrow buttons, then press OK.
6. To return to the Ready screen, press the Menu button.
(3615) Procedure
1. At the printer control panel, press the Machine Status button.
2. Touch Tool s, then touch Admin Settings.
3. Touch Service Tools.
4. Touch Adjust Density.
5. Touch the desired density from Darken to Lighten, then press OK.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux