Xerox WorkCentre 3615 Service Manual

Specifications
Phaser 3610, WorkCentre 3615 Service Manual 8-9
Consumables
Each Toner Cartridge has a CRUM (Customer Replaceable Unit Meter) to record new or used cartridge
and usage information. The CRUM contains a company ID, Region ID, and Xerox company name. A
CRUM counts the amount of remaining toner. When toner empty is detected, Life End status will be
sent to indicate toner empty. Internal counters track Consumables life usage. Life ratings are based on
A-size sheets at 5% coverage.
Generally, consumables are to be replaced by the customer. It may be necessary to replace
consumables for recovery from or for insolation of faults due to consumables.
Product Name
Replacement Life
(reference)
CRUM
Installed
Counter
Reset
Remarks
Toner Cartridge (Standard Capacity) 6KPV Yes Auto Reset CRU
Toner Cartridge (High Capacity) 14KPV Yes Auto Reset CRU
Toner Cartridge (Meter) 25KPV Yes Auto Reset CRU
Toner Cartridge (Extra High Capacity) 25KPV Yes Auto Reset CRU
Drum Cartridge 100KPV Yes Auto Reset CRU
Maintenance KIT(110V - Fuser / BTR) 200KPV No Manual CRU
Maintenance KIT(220V - Fuser / BTR) 200KPV No Manual CRU
Maintenance Kit (1 set of Feed Rolls) 100KPV NO NO CRU

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux