Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-312
FIP 1. 382
133-289 File Erase Error
Cause:
File erase error.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 383
133-290 Print Decode Error
Cause:
At JBIG data print decode, decode error occurred three successive times.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Check the telephone line connection. Reconnect the telephone line connector.
3. Check the sending side fax. Receive the fax data from a good fax machine.
4. Update to the latest F/W.
5. If the error persists, ensure that the error is replicated after the printer is powered Off and
then On, and then replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux