Xerox WorkCentre 3615

Image Quality
Phaser 3610, WorkCentre 3615 Service Manual 3-31
IQ-13 Jagged Characters
Troubleshooting Reference
Applicable Parts Example Print
• Toner Cartridge, PL 3.1
•ROS Assembly, PL 3.2
Troubleshooting Procedure
Step Actions and Questions Yes No
1
Is the installed paper new and dry? Does the
paper meet specifications?
Go to step 2.
Replace with paper
that meets specifica-
tions, then go to
step 2.
2
Change the Screen setting to "Fineness" via the
printer driver.
- To change the Screen settings, use [Screen] on
the Image Options tab of the printer driver.
Note: If using a downloaded font,
ensure that the font is recommended
for printer, operating system, and the
application being used.
Is the image printed correctly?
Troubleshooting
complete.
Go to step 3.
3
Change the Image Quality setting to "High Reso-
lution" via the printer driver.
- To change the Image Quality settings, use
[Image Quality] on the Image Options tab of the
printer driver.
Is the image printed correctly?
Troubleshooting
complete.
Go to step 4.