Xerox WorkCentre 3615

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-232
FIP 1. 226
034-791 Check Line Connection
Cause:
The Telephone Line Connection Error.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
Line connection error (unconnected or mis connected) might have occurred. Check the line con-
nection.
FIP 1. 227
034-799 No Dial Data
Cause:
Auto dial is activated but no dial data exist.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the telephone line connection. Reconnect the telephone line connector.
2. Check the sending side fax. Receive the fax data from a good fax machine.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•(REP 5.4 Fax PWB)
•(REP 5.1 ESS PWB)