Xerox WorkCentre 3615 Service Manual

Maintenance
Phaser 3610, WorkCentre 3615 Service Manual6-6
Resetting Counters
Resetting the Transfer Unit / Fuser Counters (3610)
The reset Transfer Unit / Fuser feature resets the life counter after you replace the assemblies.
1. At the printer control panel, press the Menu button.
Note: Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Navigate to Reset Trans Unit / Fuser, then press OK.
5. At the Are you sure? prompt, press Yes, then press OK.
After the process completes, the printer to returns to Ready.
Resetting the Transfer Roller / Fuser Assembly Counter (3615)
The reset Transfer Unit / Fuser feature resets the life counter after you replace the assemblies.
1. At the printer control panel, press the Machine Status button.
2. Touch Tool s, then touch Admin Settings.
3. Touch Service Tools.
4. Touch Reset Transfer Unit / Fuser.
5. Touch Reset.
6. Touch Yes, Reset.
The printer displays a message, then returns to the Services Home screen.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux