Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-141
FIP 1. 40
016-610 Panel Destination Mismatch
Cause:
Only for Production Line.
An attempt was made to apply JP setting to non-JP panel,
Solution:
No action is required.
FIP 1. 41
016-612 Invalid MAC Address
Cause:
MAC address is invalid.
Solution:
1. Rewrite Mac address.
2. Update to the latest F/W.
3. If the error persists, ensure that the error is replicated after the printer is powered Off and
then On, and then replace (REP 5.1 ESS PWB).
FIP 1. 42
016- 718 Memory Over flow
Cause:
The current printing job process cannot be continued because the memory capacity is exceeded.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Deleting the data by executing Clear Storage.
2. Execute "Clear Storage" under "Maintenance" in the Control Panel.
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
upgrade the memory as required.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux