Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-336
Network System Fault Check
Interface (Physical/Logical)
1. Physical Interface Description
The following physical interfaces are supported.
(1) IEEE1284
• Only supported in the Mid range and earlier products.
(2) USB
(3) Ethernet (10BaseT, 100BaseTX)
• Has the features to automatically detect and switch the transmission speed (10Mbps,
100Mbps).
Also, the transmission speed can be fixed by settings.
2. Logical Interface Description
It is possible to set whether to activate the system for each of the following logical interfaces.
Default Activation:IEEE1284, SMB (DLC), SNMP (IPX)
Supported for receiving print jobs
(1) IEEE1284 (when 1.1IEEE1284 is supported)
(2) USB
(3) Lpd
(4) Net Ware
(5) Apple Talk (Ether Talk)
(6) SMB
(7) IPP
(8) Internet Fax Print
(9) Port9100
(10) CWIS File Upload Print
Supported for management interface
(1) SNMP
(2) CWIS
Supported for other services
FTP Server

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux