Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-292
FIP 1. 326
117-331 IPS Error
Cause:
In relation to IPS, the following internal error has occurred.
• OS function return value error
•DSP program load fail
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 327
117-338 Enable Device Memory Error
Cause:
Invalid, although SD CARD was detected.
This error will be outputted if SD CARD is removed where the power is on.
Solution:
Turn the power Off and On to check that the error recurs, then proceed to the FIP.
Step Check and Action Yes No
1
Is the Connector (P/J221) between the SD CARD
and the ESS PWB free of broken/bent pins, foreign
substances, burns, and etc., and is the unit installed
properly?
Replace the SD
CARD.
Reinstall the
SD CARD

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux