EasyManuals Logo

Xerox WorkCentre 3615 Service Manual

Xerox WorkCentre 3615
774 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #349 background imageLoading...
Page #349 background image
Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-291
FIP 1.324
117-315 EEPROM Driver Error
Cause:
EEPROM Driver program error.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
FIP 1. 327
117-321 Device Memory Error
Cause:
SD CARD Type Invalid.
Solution:
Turn the power Off and On to check that the error recurs, then proceed to the FIP.
Step Check and Action Yes No
1
Is the regular SD CARD used? Go to Step 2.
Use the regular
SD CARD
2
Is the Connector (P/J221) between the SD CARD
and the ESS PWB free of broken/bent pins, foreign
substances, burns, and etc., and is the unit installed
properly?
Go to Step 3.
Reinstall the SD
CARD
3
Replace the SD CARD.
Does an error occur?
Replace
(REP 5.1 ESS
PWB)
Troubleshooting
complete.

Table of Contents

Other manuals for Xerox WorkCentre 3615

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 3615 and is the answer not in the manual?

Xerox WorkCentre 3615 Specifications

General IconGeneral
Print TechnologyLaser
Print ResolutionUp to 1200 x 1200 dpi
FaxYes
Duplex PrintingYes
FunctionsPrint, Copy, Scan, Fax
Processor533 MHz
Memory (Standard)256 MB
Paper Output250 sheets
Fax Speed33.6 kbps
Print Speed47 ppm
Scan Resolution600 x 600 dpi
Automatic Document Feeder50 sheets
ConnectivityEthernet
First Page Out Time (Copy)8.5 seconds
Paper Capacity250 sheets
Network ConnectivityEthernet
Operating System CompatibilityWindows, Mac, Linux

Related product manuals