Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-162
FIP 1. 86
017-980 Report File Open/Close Error
Cause:
Report job fails to open/close report file.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 87
017-983 EEPROM R/W Error
Cause:
At system boot, EEPROM Read/Write check error (sum check error).
Solution:
1. Delete message after start-up processing is completed.
2. Turn the power Off and On to check that the error recurs and then replace (REP 5.1 ESS PWB).
FIP 1. 88
017-986 FAX Controller Error
Cause:
Create empty file (0Byte).
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Turn the power Off and On to check that the error recurs, then update to the latest F/W.
2. If the problem cannot be solved, replace (REP 5.1 ESS PWB).

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux