Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-265
FIP 1. 279
072-211 Feeder 2 Error
Cause:
IOT Option Feeder2 Failure.
Solution:
Turn the power Off and On to check that the error recurs, then proceed to the FIP.
Step Check and Action Yes No
1
Check the operation of the OPTIONAL TRAY
MOTOR ASSEMBLY (when the Optional Sheet
Feeder is installed)
• Execute the Diag Digital Output [071-009] to
check the rotation of the OPTIONAL TRAY
MOTOR ASSEMBLY.
• Is it working properly?
Go to Step 2.
Go to
FIP 2.17
2
Check the connections between the OPTIONAL
TRAY PWB ASSEMBLY and the MCU PWB, as well as
between the OPTIONAL TRAY PWB ASSEMBLY and
the LVPS PWB.
• Are the OPTIONAL TRAY HARNESS ASSEMBLY
(P/J213P/J243, P/J24P/J243) and the
HARNESS ASSEMBLY FEEDER DRAWER 1
(P/J243P/J419) connected securely?
Go to Step 3.
Securely connect
the OPTIONAL
FEEDER HARNESS
ASSEMBLY
FEEDER and the
DRAWER 1 HAR-
NESS ASSEMBLY
3
• Replace the OPTIONAL FEEDER HARNESS
ASSEMBLY.
• Does an error occur?
Go to Step 4.
Troubleshooting
complete.
4
• Replace the DRAWER 1 FEEDER HARNESS
ASSEMBLY .
• Does an error occur?
Go to Step 5.
Troubleshooting
complete.
5
•Replace (REP 7.5 Optional Tray PWB Assembly)
• Does an error occur?
Go to Step 6.
Troubleshooting
complete.
6
•Replace (REP 7.8 Feeder Assembly).
• Does an error occur?
Replace
(REP 5.6 MCU
PWB)
Troubleshooting
complete.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux