Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-249
FIP 1. 257
050-130 IOT Remain Zone Fusing Jam
051-130 is displayed in the UI.
Either of the following error codes is registered in the Error Log.
• 077-104 Regi Off Jam
• 077-106 Exit On Jam
• 077-108 Exit Off Early Jam
• 077-109 Exit Off Jam
Cause:
When Dynamic Jam (cause) was detected:
• 077-104 Regi Off Jam
• 077-106 Exit On Jam
• 077-108 Exit Off Early Jam
• 077-109 Exit Off Jam
When Static Jam (collateral) was detected:
•Exit Sensor On
Solution:
Paper jam has occurred. Remove the jammed paper.
If there is no jammed paper, or the error still occurs after having removed the jammed paper,
turn the power Off and On to check that the error recurs, then proceed to the appropriate FIP.
•For 077-104 Regi Off Jam, go to FIP 1. 283
•For 077-106 Exit On Jam, 077-108 Exit Off Early Jam, and 077-109 Exit Off Jam,
go to FIP 1. 284

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux