Xerox WorkCentre 3615

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-332
5
•Replace (REP 3.5 Fusing Assembly).
Note: Make sure that the FUSING
ASSEMBLY has cooled down before
performing the operation.
• Turn the power Off and On. Does an
abnormal noise occur?
Go to Step 6.
Troubleshooting
complete.
6
•Replace (REP 4.1 Main Drive Assembly).
• Turn the power Off and On. Does an
abnormal noise occur?
Replace
(REP 5.6 MCU
PWB)
Troubleshooting
complete.
Step Check and Action Yes No