Service Parts Disassembly
Phaser 3610, WorkCentre 3615 Service Manual4-100
Replacement
1. Print a configuration page and give to the customer. Due to the replacement of the ESS PWB, tell
the customer that they will:
•lost their fax log.
• have to set up their network settings after the ESS is replaced.
• have to import their address book after the ESS is replaced.
2. Before installing a replacement ESS PWB, transfer these components: (Figure 3)
a. Remove (U22) / (U1329 / U1330) from the ESS PWB and install on the replacement PWB.
b. Remove the Memory / SD Card from the ESS PWB and install on the replacement PWB.
Figure 3
3. Replace in reverse order.
3615
3610