Xerox WorkCentre 3615 Service Manual

Specifications
Phaser 3610, WorkCentre 3615 Service Manual 8-15
Operating Environment
Installation Temperature / Humidity
The temperature and non-condensing relative humidity for installation is as follows:
• During operating: 10 to 32°C, 10 to 85%RH (No condensation)
• At standby: minus -20 to 40°C, 5 to 85%RH (No condensation)
Installation Altitude
The machine operates normally at the altitude from 0 to 10170 ft. (0 to 3100 meters) with high-
altitude settings.
Installation Horizontality
The machine operates normally when it is installed in a horizontal position and when the maximum
inclination is 1 degree or less in the front to back direction and in the left-right direction.
Storage Temperature of a Toner Cartridge
The guaranteed period of an unpacked print cartridge is as follows:
• Normal conditions: 24 months under 0 to 35°C, 15 to 80% RH.
• Harsh conditions: 1 month under -20 to 0°C and 35 to 40°C, 5 to 15% RH, 95% RH.
The storage altitude shall be0 to 10,170 ft. (0 to 3100 meters). This can be extended to 0 to 49,212 ft.
(0 to 15,000 meters) when shipped by air.
Note: Provided that the cargo bay is pressurized to 70.9275 Kpa or higher.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux