Xerox WorkCentre 3615

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-22
016-572
Print Job Error
Press Ok Button
Error 016-572
Press Ok Button
<Job ticket media error>
Cause:
The paper attribute specified by XCPT (XPIF) can-
not solve paper selection.
FIP 1. 33
016-573
Print Job Error
Press Ok Button
Error 016-573
Press Ok Button
<Job ticket parse error>
Cause:
XPIF parser detects error other than those listed
above.
FIP 1. 34
016-602
Initialize NVM
Initializing...
<System NVM Initialize>
Cause:
At POWON start-up, execute NVM clear.
FIP 1. 35
016-603 -
<ESS-NVM Parameter Recover>
Cause:
Executed ESS-NVM Parameter Recovery.
FIP 1. 36
016-604 -
<ESS-NVM Parameter Copy>
Cause:
Executed ESS-NVM Parameter Copy.
FIP 1. 37
016-606 -
<Clear Job History>
Cause:
Clear Job History.
FIP 1. 39
016-610
Error 016-610
Power Off/On
<Panel Destination Mismatch>
Cause:
Only for Production Line.
Tried to apply JP setting to non-JP panel, or tried
to apply non-JP setting to JP panel.
FIP 1. 40
016-612
Error 016-612
Power Off/On
<Invalid MAC Address>
Cause:
Only for Production Line.
MAC address is invalid.
FIP 1. 41
016-718
Out of Memory
Press Ok Button
Error 016-718
Press Ok Button
<Memory Over flow>
Cause:
The current printing job process cannot be contin-
ued because the memory capacity is exceeded.
FIP 1. 42
016-720
Print Job Error
Press Ok Button
Error 016-720
Press Ok Button
<PDL Error>
Cause:
The print data cannot be processed by PDL.
FIP 1. 43
Status
Code
(3610)
LCD Message Name/Description of Error FIP