5DISPlay Subsystem
226 N1911A/1912A P-Series Power Meters Programming Guide
Syntax
Parameters
Example
Item Description/Default Range of Values
numeric_value A numeric value for the analog meter lower
scale limit:
• DEF: the default is –70 dBm
• MIN: –150 dBm
• MAX: 230 dBm
Units used are determined by the current
setting of UNIT:POWer and
CALCulate:RELative:STATe as shown
in Ta bl e 5 - 15 .
–150 to 230 dBm
DEF
MIN
MAX
DISP:WIND1:ANAL:LOW –50 This command sets the upper window’s
analog meter lower scale limit to –50
dBm.
:WIND
1
2
:ANAL
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space
DISP
:LOW
To Next Page
Loading...
