Agilent Technologies N1911A Programming Guide

10 SENSe Subsystem
394 N1911A/1912A P-Series Power Meters Programming Guide
offset table is selected, the power meter verifies that the number of
offset points defined is equal to the number of frequency points
defined. If this is not the case, error –226, “Lists not the same length”
occurs.
•If the CSET1 command is used when a P- Series or an E- Series power
sensor is connected the error –241, “Hardware missing” occurs.

Agilent Technologies N1911A Specifications

General

Brand	Agilent Technologies
Model	N1911A
Category	Measuring Instruments
Language	English