Autodesk ALIAS 2010 - New Menu Items Used in this Tutorial; New Control Panel Tools You will Use in this Tutorial; Part 1: Creating the Joystick Handle

New menu items used in this tutorial
■ Layers > New
■ Layers > Visibility > Invisible/Visible
■ WindowDisplay > Hardware Shade
New Control Panel tools you will use in this tutorial
■ Display CV/Hull
Part 1: Creating the Joystick Handle
In this section, you will create the joystick handle by revolving a profile curve.
Watch Part 1 of the tutorial.
Opening the tutorial file
1 Choose File > Open to open the File Browser.
2 In the File Browser, locate the CourseWare directory and set it as the
Current Project.
3 Open the file called joystick.wire, located in the wire directory in the
CourseWare project.
For information on how to open a file, see Opening the tutorial file on
page 82.
A dialog box appears, asking if you want to delete all objects, shaders
views, and actions. Click Yes.
Part 1: Creating the Joystick Handle | 157