Conclusion
Congratulations! You have created an accurate model of the MP3 Player.
You have learned to:
■ Use Keypoint curves to create accurate geometric shapes.
■ Create surfaces with a draft angle.
■ Set up Construction Options for accurate modeling.
■ Create edges with a radius using the Fillet and Round tools.
■ Create symmetrical and duplicated geometry.
Quiz
Working accurately to dimensions will be an important part of most of your
design projects. Complete this quick quiz to reinforce the tools and techniques
you used.
1 How do you set up which modeling units (for example, mm or inches)
you will use for a model?
(a) In the Preferences > General Preferences window.
(b) In the Windows > Information > Information Window.
(c) In the Preferences > Construction Options window.
(d) Type in the units, that is, ‘mm’ after you enter the value.
(e) In the Construction > Grid Preset option window.
2 When projecting a curve, what determines the direction the curve is
projected in?
(a) You are prompted to type in the direction.
(b) The active window: the curve will be projected perpendicular to the
window view.
(c) There is an option in the Project option window.
(d) Hold down the Shift key when selecting the curve.
(e) It is determined by the mouse button you use to select the curve.
Conclusion | 505
To Next Page
Loading...