You can define your own hotkeys, if you want. For the most part, you
will not use hotkeys in these lessons.
If you are new to Autodesk Alias products, we recommend that you spend
some time working with the product before you define hotkeys, so you
can learn which commands you use frequently enough to need a hotkey.
3 Click the close box to close the hotkey editor.
Changing Your View of the Model
Learn how Alias represents the 3D model on your 2D monitor, and how to use the
view controls to get the best possible angle on the model for the task at hand.
Tracking, Dollying, and Tumbling the Camera’s View
There are many different ways to change the camera’s view in Alias.
In general, you only need to learn three camera moves to model effectively:
tumble, dolly, and track.
56 | Chapter 3 Interface Basics
To Next Page
Loading...