Save your work
1 Save your work in the wire directory of the Lessons project.
2 Name your file myRender_Basics3.wire.
Part 4: Creating an Image
In this section, you will use the Hardware shade rendering to create a high
quality image that can be used for presentations or work-in-progress
discussions.
Opening the tutorial file (optional)
If you successfully completed Part 3, proceed to the next step: Setting the
Image Quality below.
If you were not successful in part 3, open the file called
Render_Basics_part4.wire, located in the wire directory of the CourseWare
project. This file contains the completed model from Part 3.
Part 4: Creating an Image | 669
To Next Page
Loading...