4 A dialog box appears, asking if you want to delete all objects, shaders,
views, and actions. Click Yes.
5 If your values for construction tolerances differ from those in the
showergel.wire file, you will be presented with a dialog.
6 Click Accept New Settings to use the construction tolerances in
showergel.wire.
The file is opened.
The main bottle curves are visible and placed on a layer named Curves.
Other curves are on layers that are not currently visible; you will use these
later in the tutorial.
Setting the Construction Tolerances
Before you start to create your model, you will choose the construction
tolerances you want to work to.
1 Choose Preferences > Construction Options .
Part 1: Creating Primary Surfaces | 517
To Next Page
Loading...