Autodesk ALIAS 2010 - Part 2: Adding a Label

TIP Only the most commonly used parameters are shown in the Visualize
Panel. To access all the parameters for each shader, either double-click the
shader ball icon, or use Render > Multi-lister> Shaders.
Saving your work
Now, you will save the scene as a new file.
1 Choose File > Save As to open the File Browser.
2 Save your work in the wire directory of the Lessons project.
3 Name your file myRender_Basics1.wire.
Part 2: Adding a Label
In this part of the tutorial, you will take a graphic design for the label of the
shower gel bottle, and apply it to the label surface.
The process of applying the graphic is called Mapping.
The graphic file (shown on the left) is in a standard format, such as a .tif or
.jpg. It can be mapped onto a surface (shown on the right).
Part 2: Adding a Label | 647