Interfaces Local Area Networks(LANs)
IX20 User Guide
209
(config)> network interface my_lan ipv4 dhcp_server advanced primary_
dns value
(config)> network interface my_lan ipv4 dhcp_server advanced
secondary_dns value
(config)> network interface my_lan ipv4 dhcp_server advanced primary_
ntp value
(config)> network interface my_lan ipv4 dhcp_server advanced
secondary_ntp value
(config)> network interface my_lan ipv4 dhcp_server advanced primary_
wins value
(config)> network interface my_lan ipv4 dhcp_server advanced
secondary_wins value
(config)>
where value is one of:
n
none: No server is broadcast.
n
auto: Broadcasts the IX20 device'sserver.
n
custom: Allowsyou to identify the IPaddress of the server. For example:
(config)> network interface my_lan ipv4 dhcp_server advanced
primary_dns_custom ip_address
(config)>
The default is auto.
f. Set the IPaddress or host name of the TFTPserver:
(config)> network interface my_lan ipv4 dhcp_server advanced nftp_
server ip_address
(config)>
g. Set the relativepath and file name of the bootfile on the TFTPserver:
(config)> network interface my_lan ipv4 dhcp_server advanced bootfile
filename
(config)>
9. See Configure DHCPoptionsfor information about custom DHCPoptions.
10. See Map static IPaddresses to hosts for information about static leases.
11. Save the configuration and apply the change
(config network interface my_lan ipv4 dhcp_server advanced static_lease
0)> save
Configuration saved.
>
12. Typeexit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Map staticIP addressesto hosts
You can configure the DHCPserver to assign static IPaddresses to specific hosts.
To Next Page
Loading...
Need help?
General