Instructions for use Zeus Infinity Empowered SW 2.n 137
Operation
The Test details dialog window will be opened.
2 Touch the Leak test button (B).
3 Follow the instructions in the field (D).
4 Touch the Start button (C) and confirm with ro-
tary knob.
z If during leak test it is detected that the last self
test was unsuccessful or that, after activating
the device, no self test was performed at all, the
following message appears next to the name
field of the tester: Self test required!
310
CAUTION
If the leak test has been canceled, it can lead to
leaks not being detected.
Pay special attention during operation.
B
C
Te s t d e ta i l s
D
To Next Page
Loading...
