Overview
40
Instructions for use Zeus Infinity Empowered SW 2.n
Product labels
Product label Explanation
When connecting auxiliary devices, be aware of the leakage current.
Label on right side of door
When transporting the device, move all hinged arms to the transport po-
sition. To do this, swing all hinged arms inward to the center of the device
and lock them.
Label on left side of door
When transporting the device, make sure that the slope of the floor does
not exceed ±10°. If the transport position is not maintained, the maximum
slope of the floor is reduced to ±5°. Risk of tipping over!
max.800mm
max.800mm
To Next Page
Loading...
