Dräger Zeus Infinity Empowered User Manual

Instructions for use Zeus Infinity Empowered SW 2.n 59
Assembly and preparation
z Remove the breathing system, see page 363.
1 Unscrew inspiratory and expiratory connecting
nozzles (A) for breathing hoses.
2 Insert both SpiroLife flow sensors (B).
3 Screw connecting nozzles (A) back on again
(use only blue, non-rotatable nozzles).
z Fit the breathing system again and lock it in
place.
Zeus IE as a ceiling device
Features
Zeus IE can be used in conjunction with the "Forta
lift" ceiling supply unit.
The Zeus IE anesthesia device can be connected
to the ceiling supply unit using a corresponding de-
vice mount and the appropriate operating unit.
Docking Zeus IE with the ceiling supply
unit
039
A
B
CAUTION
To use Zeus IE in combination with a ceiling sup-
ply unit safely, it is essential to follow the Forta lift
instructions for use.

Dräger Zeus Infinity Empowered Specifications

General

Category	Medical Equipment
Type	Anesthesia Workstation
Brand	Dräger
Model	Zeus Infinity Empowered
Tidal Volume Range	20 - 1500 ml
Integrated Monitoring	Yes
Gas Supply	O2, N2O, Air
Communication	Ethernet, USB
Display	Touchscreen
Ventilation Modes	Volume Control, Pressure Control, Pressure Support, SIMV
PEEP	0 - 20 cm H2O
Oxygen Concentration	21% - 100%
Vaporizer Compatibility	Dräger Vapor 2000, 3000
Gas Delivery	Electronic
Power Supply	AC and battery backup