Dräger Zeus Infinity Empowered - Symbols

Overview
38
Instructions for use Zeus Infinity Empowered SW 2.n
Symbols
Symbol Explanation
Manufacturer
Date of manufacture
WEEE label, Directive 2002/96/EC
Use by
Caution! Observe the accompany-
ing documentation! (symbol)
Attention! (safety sign)
Observe the instructions for use
(symbol on TurboVent 2 MK05045)
Warning! Strictly follow these in-
structions for use
Protection class type B (body)
Protection class type BF (body float-
ing)
Protection class type BF (body float-
ing, defibrillation protected)
Protection class type CF (defibrilla-
tion-protected)
ESD warning label, observe the
warning statement, see "Information
on electromagnetic compatibility"
on page 13''
Caution when touching hot sur-
faces.
Serial number
Order number
Lot number
Storage temperature
Relative humidity
Atmospheric pressure
Do not use if package damaged
Do not reuse
YYYY-MM
SN
REV
LOT
Mains power supply (AC voltage)
Potential equalization connector
Group views, screen displays
Group trends/data, information on
the course of ventilation
Group special procedure
Group alarms
Group configuration, system set-
tings and settings for sensors
Group Start/Standby
System on or off (at the key on
screen)
Pulse rate
Lower and upper alarm limits
Upper alarm limit
lower alarm limit
– – Alarm limit is switched off
* * * * Enter 4-digit access code
OK, accept the setting selected
Close dialog window
Charge state of internal battery
88 to 100 %
Charge state of internal battery
63 to <88 %
Charge state of internal battery
38 to <63 %
Charge state of internal battery
13 to <38 %
Charge state of internal battery 0 to
<13 %
Charge state unknown
Power supply from the internal bat-
tery
Symbol Explanation
?%