Alarms
164
Instructions for use Zeus Infinity Empowered SW 2.n
Ventilation
z Touch the Ventilation button (A).
The following upper and lower alarm limits can be
configured:
B etCO2 (Endexpiratory CO2 content of the
breathed air)
C inCO
2 (Inspiratory CO2 content of the breathed
air)
D FiO
2 (Inspiratory O2 content of the breathed air)
E MVe (Expiratory minute volume)
F V
Ti (Inspiratory tidal volume)
G Paw (airway pressure)
H Brody Factor
Leakage detection in closed operation, see "Set
ranges of the patient monitoring alarm limits"
on page 179.
The alarm limits set are displayed on the wave-
forms as a broken line.
Anesthesia
z Touch the Anesth. button (A).
The following upper and lower alarm limits can be
configured:
B Inspiratory N2O content of the breathed air
(inN
2O) These buttons only appear if N2O is se-
lected as the carrier gas.
C Inspiratory anesthetic agent content of the
breathed air (depending on the selected anes-
thetic agent, e.g., inIso).
361
Alarms
A
B
CD
E
F
G
H
362
Alarms
A
B
C