Technical data
428
Instructions for use Zeus Infinity Empowered SW 2.n
Anesthesia depth monitoring BIS
Parameter Bispectral Index BIS
Signal Quality Index SQI
Electromyography EMG
Burst Suppression Ratio BSR
Spectral Edge Frequency SEF
Burst Count BCT
Total Power PWR
Measuring ranges and accuracy BIS: 0 to 100 ±1
SQI: 0 to 100 % ±0.1 %
EMG: 30 to 80 dB ±1 dB / 0 to 100 dB (in frequency
range 70 to 110 Hz)
BSR: 0 to 100 % ±0.1 %
SEF: 0.5 to 30 Hz ±0.01 Hz (parameters selectable)
BCT: 0 to 30 ±1
PWR: 40 to 100 dB (in the frequency range from 0.5
to 30 Hz)
Sensor impedance test PASS: Impedance <7.5 kΩ
Filter High filter: off, on, auto
Low filter: off, on
Notch filter: off/on
Averaging time 15, 30 seconds
EEG waveform display range 50, 100, 250, 500 µV, Auto
Trend display ranges BIS: 0 to 100
EMG: 0 to 100
SQI: 0 to 100
BSR: 0 to 100
BCT: 0 to 30
SEF: 0 to 30
PWR: 0 to 100
To Next Page
Loading...
