Instructions for use Zeus Infinity Empowered SW 2.n 333
Configuration
A list (B) of all configurable buttons opens. The fol-
lowing buttons can be selected:
– Open dialog: Screen setup
– Open dialog: Brightness/Volume
– Open dialog: Help
– Open dialog: New patient
– Open dialog: Patient setup
– Open dialog: Sensors/Parameters
– Open dialog: System setup
– Open dialog: Web access
– Direct action: Zero all BPs
– Direct action: Stop all pumps
– Direct action: Display all
– Direct action: Print screen
– Direct action: Apnea alarms off
– Direct action: CO
2 alarms off
– Direct action: Print case
– Direct action: CBM mode on
– Direct action: Freeze waveforms
– Direct action: CV alarms off
– Direct action: Neuro alarms off
– Direct action: NMT start
– Direct action: Switch to next web application
– Direct action: SmartPilot
– Direct action: Recorder start
– Direct action: Confirm technical alarms
– Web access 1 to 4
Configuring buttons in the main menu bar
1 Select the required button from the list (B).
The button (C) displays the selected button and its
function. The group assignment icon is displayed at
the same time.
2 Touch the (C) button.
The selected button is automatically assigned to
the respective group in the main menu bar.
Repositioning buttons in the main menu bar
The associated buttons are repositioned in the re-
spective group in the main menu bar.
1 Touch the Change button position button (D).
All buttons in the main menu bar are displayed in
yellow.
Select the button to be moved from the main menu
bar.
The color of the selected button remains yellow and
all other buttons turn green.
2 Move the selected button and confirm with the
rotary knob.
Removing buttons from the main menu bar
1 Touch the Remove button button (D).
All buttons that can be deleted are displayed in the
main menu bar in yellow.
2 Touch the respective button.
The button is removed from the main menu bar.
To Next Page