Keysight Technologies P Series

10 SENSe Subsystem
342 Keysight N8262A Programming Guide
[SENSe[1]]|SENSe2:POWer:AC:RANGe:AUTO <boolean> 393
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4 Commands 395
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME <numeric_value> 396
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:TIME <numeric_value> 398
[SENSe[1]]|SENSe2:TEMPerature? 400
[SENSe[1]]|SENSe2:TRACe Commands 401
[SENSe[1]]|SENSe2:TRACe:OFFSet:TIME <numeric_value> 402
[SENSe[1]]|SENSe2:TRACe:TIME <numeric_value> 404
[SENSe[1]]|SENSe2:TRACe:UNIT <character_data> 406
[SENSe[1]]|SENSe2:V2P ATYPe|DTYPe 408
SENSe[1]|2:TRACe:LIMit:LOWer <numeric_value> 410
SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value> 412
SENSe[1]|2:TRACe:X:SCALe:PDIV <numeric_value> 414
SENSe[1]|2:TRACe:Y:SCALe:PDIV <numeric_value> 416
This chapter explains how the SENSe command subsystem directly affects device
specific settings used to make measurements.