Lenze i550

11.4.2 Analog output 2
Sengs for analog input 2.
Precondions
Control Unit (CU) with applicaon I/O
Details
The analog output 2 is controlled with the signal selected in 0x263A:002 (P441.02).
The following sengs are possible for the analog output:
•
Denion of the signal range
①
•
Denion of the output range
②
AO2
0x263A:0010x263A 003:
0x263A 004:
X3
0x2DAB:001
V/mA
0x263A:002
0x2DAB:002
[V]
[mA]
Min
Max
Signal
Diagnosc parameters:
•
The current output voltage is displayed in 0x2DAB:002 (P113.02).
•
The actual output current is displayed in 0x2DAB:001 (P113.01).
For further details and conguraon examples, see chapter "Analog output 1". ^ 275
Parameter
Address Name / seng range / [default seng] Info
0x263A:001
(P441.01)
Analog output 2: Output range
(Analog output 2: AO2 outp. range)
•
Only available for applicaon I/O.
Denion of the output range.
0 Inhibited
1 0 ... 10 VDC
2 0 ... 5 VDC
3 2 ... 10 VDC
4 4 ... 20 mA
5 0 ... 20 mA
0x263A:002
(P441.02)
Analog output 2: Funcon
(Analog output 2: AO2 funcon)
•
Only available for applicaon I/O.
Selecon of the signal to be shown at analog output 2.
0 Not acve No output signal.
1 Output frequency Actual output frequency (resoluon: 0.1 Hz).
2 Frequency setpoint Current frequency setpoint (resoluon: 0.1 Hz).
3 Analog input 1 Input signal of analog input 1 (resoluon: 0.1 %).
4 Analog input 2 Input signal of analog input 2 (resoluon: 0.1 %).
5 Motor current Actual motor current (resoluon: 0.1 A).
6 Output power Actual output power (resoluon: 0.001 kW).
7 Torque actual value Torque actual value (resoluon: 0.1 %).
•
100 % ≡ permissible maximum torque 0x6072 (P326.00)
10 Sequencer controlled (from version 03.00) Voltage value which has been set for the currently executed sequencer
segment (resoluon: 0.01 V).
4Sequencer^ 91
11 DC-bus voltage
12 Device ulisaon (i*t)
20 NetWordIN3 Actual value of the NetWordIN3 data word (resoluon: 0.1 %).
4Control analog outputs via network^ 302
21 NetWordIN4 Actual value of the NetWordIN4 data word (resoluon: 0.1 %).
4Control analog outputs via network^ 302
201 Internal value (from version 05.00) Internal values of the manufacturer.
202 Internal value (from version 05.00)
203 Internal value (from version 05.00)
204 Internal value (from version 05.00)
205 Internal value (from version 05.00)
206 Internal value (from version 05.00)
I/O extensions and control connecons
Congure analog outputs
Analog output 2
278