Lenze i550

Address Name / seng range / [default seng] Info
0x282A:004 Status words: Extended status word
•
Read only
Bit-coded status word.
Bit 8 Reverse rotaonal direcon 1 ≡ reversal acve.
Bit 10 Inverter disabled (safety) 1= the inverter has been disabled by the integrated safety system.
Bit 11 STO acve 1 = "Safe torque o (STO)" funcon has been triggered by the integrated
safety system. Safe inputs SIA and SIB = LOW (simultaneously).
0x282A:005
(P126.05)
Status words: Device status
(Status words: Device status)
•
Read only
Display of the current inverter device state.
0 Inialisaon
2 Not ready to switch on
3 Switch on disabled
4 Ready to switch on
5 Switched on
6 Operaon enabled
7 Disable operaon
8 Shut down
9 Quick stop acve
10 Fault reacon acve
11 Fault
0x282B:001
(P125.01)
Inverter diagnoscs: Acve control source
(Inverter diag.: Acve control)
•
Read only
Display of the control source that is currently acve.
0 Flexible I/O conguraon
1 Network
2 Keypad
8 Keypad full control
9 Manual mode
0x282B:002
(P125.02)
Inverter diagnoscs: Acve setpoint source
(Inverter diag.: Acve setpoint)
•
Read only
Display of the setpoint source that is currently acve.
0 Not selected
1 Analog input 1
2 Analog input 2
3 Keypad Setpoint
4 HTL input
5 Network Setpoint
9 Manual mode: setpoint
Diagnoscs and fault eliminaon
Diagnosc parameters
Inverter diagnoscs
601