MacDon M1170 - Removing and Restoring Float

214733 189 Revision A
Removing and Restoring Float
Follow these steps to remove and restore the header float settings:
1015027
A
B
Figure 4.172: HPT Run Screen
1. Press rotary scroll knob (A) on Harvest Performance
Tracker (HPT) to display the QuickMenu system or press F1
on the console.
2. Rotate scroll knob (A) to highlight header float icon (B) and
press scroll knob to select.
1019607
A
Figure 4.173: HPT Display – Adjusting Float
3. Press soft key 3 (A) to remove or restore the header float.
NOTE:
If the header float is active, the icon at soft key 3 will say
REMOVE FLOAT; if header float has been removed, the icon
will say RESTORE FLOAT.
OPERATION