MacDon M1170 - Windrower Fault Codes

214733 426 Revision A
8.3 Windrower Fault Codes
NOTE:
The Harvest Performance Tracker (HPT) displays the windrower fault codes as a sequence of three numbers (AAA.BBBBBB.
CC). The sequence is defined as follows:
• AAA = The Source Address (SA) defines which module generated the fault.
• BBBBBB = The SPN is the description of the unique fault value.
• CC = The FMI indicated the fault’s level of severity.
Source address (SA) numbers refer to the following locations:
• 23: Harvest Performance Tracker (HPT) display
• 25: HVAC box
• 104: Master controller and connected extension modules
• 176: Roof relay module
• 178: Chassis relay module
• 190: Console and ground speed lever (GSL)
REFERENCE