214733 288 Revision A
Adding Engine Oil
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator’s seat for any reason.
1. Open the hood. Refer to 5.3.1 Opening Hood, page 256.
Figure 5.52: Oil Filler Cap
2. Clean around filler cap (A) and remove by turning it
counterclockwise.
3. Carefully pour in 14 liters (14.8 qts. U.S.) of new oil. A
funnel is recommended to avoid spillage. Refer to 5.1.3
Lubricants, Fluids, and System Capacities, page 249 for oil
specifications.
CAUTION
Do NOT fill above the HIGH mark.
4. Replace oil filler cap (A) and turn it clockwise until snug.
5. Check the oil level. Refer to 5.7.1 Checking Engine Oil Level,
page 287.
6. Close the hood. Refer to 5.3.2 Closing Hood, page 257.
MAINTENANCE AND SERVICING
To Next Page
Loading...
