MacDon M1170 - Towing Header with Windrower

214733 139 Revision A
Towing Header with Windrower
The windrower can be used to tow a MacDon draper header that has the Slow Speed Transport option installed. Ensure the
optional weight box or an approved header transporter is installed on the windrower to transfer weight to the lift arms.
Refer to Preparing Windrower to Tow a Header, page 140.
1020166
Figure 4.53: Towing a Header
WARNING
• A windrower without a header or weight box must NOT be
used to tow headers due to reduced traction and possible
loss of control.
• For towed equipment without brakes, do NOT exceed 32
km/h (20 mph).
CAUTION
• To tow a header with an M1170 Windrower, the header
must be equipped with the appropriate equipment to
comply with local regulations.
• Before towing, verify signal lighting and safety equipment is
installed and functioning properly.
• Do NOT exceed the combined gross vehicle weight (CGVW) specified in Table 4.2, page 139.
• To prevent damage and/or loss of control, ensure the machine and attached equipment are within the following
weight limits:
1014974
A
B
Figure 4.54: Maximum Weight
Table 4.2 Maximum Weight
kg lb.
Maximum GVW (includes
mounted implements)
10,660 23,500
Maximum CGVW (includes towed
and mounted implements)
11,793 26,000
Weight (A) on
both drive
wheels
Maximum
8618 19,000
Minimum
4568 10,070
Maximum weight (B) on both
caster tires
2744 6050
OPERATION