EasyManua.ls Logo

MacDon M1170 - Hoses and Lines

MacDon M1170
528 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
214733 295 Revision A
5.7.6 Hoses and Lines
Check hydraulic hoses and lines daily for signs of leaks.
1000011
Figure 5.57: Hydraulic Pressure Hazard
WARNING
Avoid high-pressure fluids. Escaping fluid can penetrate the
skin causing serious injury.
Relieve pressure before disconnecting hydraulic lines.
Tighten all connections before applying pressure.
Keep hands and body away from pin-holes and nozzles
which eject fluids under high pressure.
If ANY fluid is injected into the skin, it must be surgically
removed within a few hours by a Doctor familiar with this
type of injury or gangrene may result.
Use a piece of cardboard or paper to search for leaks.
Any service components must be genuine MacDon parts.
All connections must be properly torqued. Refer to 8.1
Torque Specifications, page 417.
IMPORTANT:
Keep hydraulic coupler tips and connectors clean. Dust, dirt, water, and foreign material are the major causes of
hydraulic system damage.
DO NOT attempt to service hydraulic system in the field. Precision fits require WHITE ROOM CARE during overhaul.
MAINTENANCE AND SERVICING

Table of Contents

Other manuals for MacDon M1170

Related product manuals