214733 53 Revision A
Figure 3.23: Windrower Lighting – Top View
• Cab-forward road lights (A) with low/high beams
• Engine-forward road lights (B) with low/high beams
• Inner work lights (C)
• Outer work lights (D)
NOTE:
Work lights (D) are also turned on when the high beams are
activated in cab-forward mode.
• Rear roof work lights (E)
• Rear swath lights (F)
NOTE:
Refer to Aligning Headlights: Cab-Forward, page 365 for
adjustment procedures.
3.7.2 Cab-Forward Lighting – Road
Figure 3.24: Road Light Button
The following lights are functional when the ROAD LIGHT button
(A) is selected and the operator’s station is locked in the cab-
forward mode:
• To toggle between low and high beams, press the HIGH
BEAM button (B)
• To operate hazard lights, press HAZARD LIGHT button (C)
OPERATOR’S STATION