MacDon M1170 - Setting Cutting Height; Double Windrowing

214733 194 Revision A
4.6.5 Setting Cutting Height
1020170
A
B
Figure 4.180: GSL
Cutting height is adjusted by raising or lowering the header with
the HEADER UP (A) or HEADER DOWN (B) switches on the
ground speed lever (GSL).
1015172
A
Figure 4.181: HPT Display
Cutting height (A) is always displayed on the Harvest
Performance Tracker (HPT) screen.
4.6.6 Double Windrowing
1015855
Figure 4.182: DWA
The Double Windrow Attachment (DWA) allows two
conditioned windrows from an A40DX Auger Header to be laid
down side-by-side for faster pickup.
Conditioned crop is deposited onto the side delivery draper and
delivered beside the windrower.
Raising the side delivery system shuts off the draper and allows
the crop to be deposited between the windrower wheels—as it
would be without the side delivery system.
Refer to the MacDon Double Windrow Attachment (DWA) for
M1 Series Windrowers Manual for complete setup, operating,
and maintenance instructions. The manual is shipped with the
DWA kit.
OPERATION