214733 294 Revision A
5.7.5 Checking Engine Coolant Level
Check coolant level in the pressurized coolant tank daily.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator’s seat for any reason.
NOTE:
Ensure the engine has cooled down prior to checking.
1. Stop the engine and remove the key.
2. Open the hood. Refer to 5.3.1 Opening Hood, page 256.
Figure 5.56: Coolant Tank
3. The tank has a MAX and MIN COLD line marker. Coolant
level should be kept at the MAX COLD line (A).
NOTE:
When checking coolant level, use the MAX COLD line on the
side of tank that faces cab for an accurate measurement.
NOTE:
For specifications, refer to 5.1 Recommended Fuel, Fluids,
and Lubricants, page 247.
4. Close the hood. Refer to 5.3.2 Closing Hood, page 257.
MAINTENANCE AND SERVICING
To Next Page
Loading...
