214733 364 Revision A
5.15.6 Lighting
Aligning Headlights: Engine-Forward
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator’s seat for any reason.
NOTE:
Header should be attached and raised to maintain proper windrower stance.
Figure 5.165: Windrower Headlight Positioning
1. Position windrower on level ground (A) 7.5 m (25 ft.) in
front of a vertical surface as shown.
NOTE:
Check that casters are positioned underneath windrower to
properly align headlights.
2. Stop the engine and remove the key.
Figure 5.166: Road Light Switch
3. Turn on ROAD lights (A) and switch to LOW BEAM.
MAINTENANCE AND SERVICING