MacDon M1170 - Connecting A40 DX Hydraulics

214733 150 Revision A
Connecting A40DX Hydraulics
CAUTION
Do NOT stand on an unlocked platform. It is unstable and may cause you to fall.
1015479
A
B
Figure 4.78: Left Cab-Forward Platform
1. Approach platform/stair unit (A) on left cab-forward side of
windrower and ensure cab door is closed.
2. Push latch (B), and pull platform (A) toward walking beam
until it stops and latch engages.
1019396
A
B
C
Figure 4.79: Hydraulic Hoses in Storage Position
3. Retrieve hydraulic multicouplers (A) and electrical
harness (B) from the header.
4. Route hose/harness bundle toward the windrower through
support (C).
1019391
A
B
1024062
A
C
B
Figure 4.80: Multicoupler
5. Insert hose support (B) into hole (A) in the windrower left
leg, and route the header hose bundle (C) under the
windrower to the hydraulic and electrical couplers.
OPERATION