214733 386 Revision A
Inspecting and Replacing 125A Main Fuses
The 125A main fuse holders are located on the frame on the left cab-forward side platform beside the battery.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator’s seat for any reason.
Access the 125A main fuses as follows:
Figure 5.205: Main Fuses
1. Stop the engine and remove the key.
2. Open the left platform. Refer to 5.4.1 Opening Platform,
page 258.
3. Remove negative battery terminal.
4. Locate the five main fuses (A) secured to the left
cab-forward front frame.
Figure 5.206: 125A Main Fuse
5. To check condition of the fuse, pull tab (A) and open
cover (B).
MAINTENANCE AND SERVICING
To Next Page
Loading...
