214733 326 Revision A
Figure 5.110: Input/Output List
6. Scroll to INTERLOCK-NEUTRAL (A) in the Input/Output List
and press enter.
Figure 5.111: Operator Present Status (Set to ON)
7. Scroll to OPERATOR PRESENT (A) and check the following
conditions:
• The status must be ON when the Operator is sitting in
the seat.
• The status must be OFF when the Operator is not sitting
in the seat.
NOTE:
If the two conditions listed above are NOT true, the
Operator Presence System requires adjustment. See your
MacDon Dealer.
MAINTENANCE AND SERVICING
To Next Page
Loading...
