SAFETY
1.9.2 E ngine Electronics
WARNING
Tampering with the electronic system installation or the original equipment manufacturer (OEM) wiring
installation can be dangerous and could result in personal injury or death and/or engine damage.
WARNING
Electrical Shock Hazard. The electronic unit injectors use DC voltage. The engine control module (ECM)
sends this voltage to the electronic unit injectors. Do NOT come in contact with the harness connector for
the electronic unit injectors while the engine is operating. Failure to follow this instruction could result in
personal injury or death.
This engine has
a co mprehensive, programmable engine monitoring system. The EC M has the ability to monitor
the engine oper
ating conditions. If conditions exceed the allowable range, the ECM will initiate an immediate action.
The following
actions are available for engine monitoring control:
• Warning
• Derate
• Shutdown
The follow in
g monito re d engine operating conditions have the ability to lim it engine speed and/or the engine po w er:
• Engine coola
nt temperature
• Engine oil p
ressure
• Engine spee
d
• Intake mani
fold air temperature
The engine
monitoring package can vary for different engine models and different engine applications. However,
the monito
ring system and the engine monitoring control will be similar for all engines. Together, the two controls
provide th
e eng ine monito ring function for the specific engine application.
147649
1
1
Revision A
To Next Page
Loading...
